4M NAMUR Single Solenoid Valve & Double Solenoid Valve (5/2 Way)
Product Characteristics
1.Internally piloted structure.
2.Structure in sliding column mode: good tightness and sensitive reaction.
3. Double control solenoid valves have memory function.
4. Internal hole adopts special processing technology which has little attrition friction, low start pressure and long service life.
5. No need to add oil for lubrication.
6. Install in the side plate with the surface upward, which can be used by directly connecting with the actuators.
7. Affiliated manual devices are equipped to facilitate installation and debugging.
8. Several standard voltage grades are optional.
Technical Parameters
Specification | ||||
Model |
4M210-06 |
4M210-08 |
4M310-08 |
4M310-10 |
Fluid |
Air (to be filtered by 40um filter element) |
|||
Acting |
lnternal pilot |
|||
Port size |
In=Out=1/8" |
In=1/4" |
ln=Out=1/4" |
ln=3/8" |
Orifice size (CV) |
4M210-08, 4M220-08: |
4M310-10, 4M320-10: |
||
Valve type |
5 port 2 position |
|||
Operating pressure |
0.15 ~ 0.8 MPa (21 ~ 114 psi) |
|||
Proof pressure |
1.2 MPa (175 psi) |
|||
Temperature |
- 20 ~ + 70 ℃ |
|||
Material of body |
Aluminum alloy |
|||
Lubrication [Note2] |
Not required |
|||
Max. frequency [Note3] |
5 cyclelsec |
4 cyclelsec |
||
Weight (g) |
4M210: 220 |
4M310: 310 |
||
[Note1] PTthread, G thread and NPT thread are available. [Note2] Once lubricated air is used, continue with same medium to optimise valve lifespan. Lubricants likelSO VG32 or equivalent are recommended. [Note3] The maximum actuation frequency is in the no-load state. [Note4] Equivalent orifice S and Cv are all calculated from the flow rate data. |
Coil Specification | |||||
ltem |
4M210, 4M220, 4M310, 4M320 |
||||
Standard Voltage |
AC220 |
AC110V |
AC24V |
DC24V |
DC12V |
Scope of Voltage |
AC: ±15%, DC: ±10% |
||||
Power Consumption |
4.5VA |
4.5VA |
5.0VA |
3.0w |
3.0w |
Protection Grade |
lP65 (DIN40050) |
||||
Temperature Classification |
B Class |
||||
Electrical entry |
Terminal, Grommet |
||||
Activating time |
0.05 sec and below |